How Many Calories Do You Burn While Sleeping?

Publié le : November 19, 2026
How Many Calories Do You Burn While Sleeping?
Publié le : November 19, 2026

    Quick answer: Most adults burn a meaningful amount of energy while sleeping, with approximately 50 calories per hour often used as a rough reference. That works out to about 400 calories over eight hours, although actual expenditure varies with body size, resting metabolism, age, and other factors. Your body continues using energy to maintain breathing, circulation, brain activity, and other essential functions throughout sleep. To estimate your personal overnight calorie burn, start with your predicted resting energy expenditure and adjust for the time you actually spend asleep.

    You may be surprised to learn that a full night's sleep can account for several hundred calories of energy expenditure, even though you are not consciously exercising or moving around.

    But the numbers can become confusing. One website might estimate 400 calories during eight hours of sleep, while another calculator suggests nearly 600 calories for a person of similar weight.

    Neither number necessarily represents a direct measurement. Different calculators use different assumptions about resting metabolism, body weight, and the energy required during sleep.

    This guide explains how sleeping calorie expenditure works, provides calculations you can follow yourself, and shows why sleep quality and long-term energy balance matter more than trying to maximize the number of calories burned overnight.

    How Many Calories Do You Burn Per Hour of Sleep?

    A commonly cited general estimate is around 50 calories per hour of sleep. Using that simple reference, seven hours would account for approximately 350 calories, and eight hours would account for approximately 400 calories.

    However, this is not a universal metabolic rate.

    Some adults expend less energy during sleep, while others expend considerably more. An individual's overnight calorie expenditure is influenced by body size, body composition, resting metabolic rate, age, hormonal conditions, and sleep duration.

    For example, two adults who both sleep for eight hours may have different energy requirements because their bodies have different amounts of metabolically active tissue.

    The important distinction is that sleeping calories are part of your normal energy expenditure. They are not extra calories burned on top of an otherwise complete daily calorie total.

    Why Does Your Body Burn Calories When You Are Asleep?

    Sleep is a period of reduced activity, but your organs and tissues remain metabolically active.

    Your body continues using energy for:

    • Breathing: Respiratory muscles and the systems controlling breathing remain active.
    • Circulation: The heart continues pumping blood, and tissues require oxygen and nutrients.
    • Brain activity: The brain maintains essential functions and undergoes characteristic changes during different sleep stages.
    • Temperature regulation: The body manages heat production and heat loss as its internal temperature changes throughout the night.
    • Cellular maintenance: Tissues continue performing metabolic processes needed for normal function and repair.
    • Hormonal and immune regulation: Sleep is associated with changes in several physiological systems that require ongoing energy.

    These processes do not stop because you are unconscious.

    At the same time, sleeping generally requires less energy than being awake and physically active. Whole-body metabolic activity often decreases during sleep as movement, muscle activity, and several physiological demands become lower.

    Is Sleeping Metabolism the Same as Basal Metabolic Rate?

    Several related terms are often used interchangeably, but they describe different measurement conditions.

    Basal metabolic rate (BMR) refers to the minimum energy required to sustain essential physiological functions under carefully controlled resting conditions, traditionally measured while awake after fasting.

    Resting metabolic rate (RMR), also called resting energy expenditure (REE), describes energy expenditure during rest under somewhat less restrictive measurement conditions.

    Sleeping metabolic rate describes energy expenditure during sleep, when physiological conditions differ from those of quiet wakefulness.

    Because the measurements are related, predicted resting energy expenditure can provide a starting point for estimating sleeping calories.

    However, sleeping metabolism is not necessarily identical to the resting metabolic rate measured while awake.

    How to Calculate Calories Burned While Sleeping

    There are several ways to estimate sleeping energy expenditure. One practical method begins with a predicted resting metabolic rate and then applies an illustrative adjustment for the reduction in metabolic demand during sleep.

    The calculation has three steps.

    Step 1: Estimate Your Resting Energy Expenditure

    The Mifflin-St Jeor equation is a commonly used prediction model for resting energy expenditure in adults.

    It uses weight, height, age, and sex-related coefficients derived from the original study population.

    The original simplified equations are:

    Male equation:

    REE = (10 × weight in kg) + (6.25 × height in cm) - (5 × age in years) + 5

    Female equation:

    REE = (10 × weight in kg) + (6.25 × height in cm) - (5 × age in years) - 161

    These equations estimate daily resting energy expenditure in kilocalories. They were developed using measured data from adults and may not be appropriate for every population or individual circumstance.

    They do not directly measure your metabolism, and the original sex-based coefficients should be understood as statistical features of the prediction model rather than precise descriptions of every person's physiology.

    For this example, consider a 35-year-old adult who:

    • Weighs 70 kg (approximately 154 lb)
    • Is 170 cm (approximately 5 ft 7 in) tall
    • Uses the original male coefficient

    The calculation is:

    REE = (10 × 70) + (6.25 × 170) - (5 × 35) + 5

    Estimated REE = 1,592.5 kcal per day

    This is a prediction of resting energy expenditure, not the number of calories the person necessarily burns during normal daily activities.

    Step 2: Estimate the Hourly Sleeping Rate

    First, divide the predicted daily REE by 24:

    1,592.5 / 24 = approximately 66.4 kcal per hour

    Because energy expenditure generally decreases during sleep compared with quiet wakefulness, a simplified calculation may apply a factor such as 0.85.

    Using that assumption:

    Estimated sleeping calories per hour = (Daily REE / 24) × 0.85

    For the example:

    66.4 × 0.85 = approximately 56.4 kcal per hour

    The 0.85 multiplier assumes sleeping energy expenditure is approximately 15% below the predicted waking resting reference.

    Important: This is an illustrative adjustment, not a scientifically established multiplier for every person or every sleep stage. Actual sleeping metabolic rate must be measured to determine the individual's real energy expenditure.

    Step 3: Multiply by the Time Actually Spent Asleep

    To estimate total sleeping calories, multiply the hourly rate by the number of hours asleep:

    Sleeping calories = Estimated hourly sleeping rate × Hours asleep

    For eight hours:

    56.4 × 8 = approximately 451 calories

    Using the same hypothetical adult, different sleep durations would produce the following estimates:

    Time asleep Estimated calories
    6 hours 338 kcal
    7 hours 395 kcal
    8 hours 451 kcal
    9 hours 508 kcal

    These figures use the same assumed hourly rate for every hour. Real metabolic expenditure changes during the night, so the table should be treated as an approximation rather than a record of actual physiological measurements.

    How Does Body Weight Change the Estimate?

    Body weight influences predicted resting energy expenditure, but weight alone is insufficient to determine someone's sleeping calorie burn.

    To illustrate the effect of weight while keeping other inputs constant, consider hypothetical adults aged 35, each 170 cm tall, with calculations using the original male coefficient and the same 0.85 sleep adjustment.

    Body weight 8-hour estimate
    60 kg (132 lb) 423 kcal
    70 kg (154 lb) 451 kcal
    80 kg (176 lb) 480 kcal

    These are formula-derived teaching examples. They do not represent average measured values for everyone in the listed weight groups.

    A person with a different height, age, body composition, or metabolic condition may have a substantially different result even at the same weight.

    Why Time in Bed Is Not Always Time Asleep

    Suppose you go to bed at 11:00 PM and get out of bed at 7:00 AM.

    That provides eight hours in bed, but you may spend 25 minutes falling asleep and another 20 minutes awake during the night.

    Your total time asleep would then be:

    480 - 25 - 20 = 435 minutes, or 7 hours and 15 minutes

    Using the hypothetical 56.4 kcal-per-hour sleeping rate gives approximately 409 calories for the actual sleep period.

    The remaining 45 minutes still involve energy expenditure while awake, but they are not sleeping minutes.

    This distinction is important when comparing an overnight sleep estimate with total energy expended throughout the entire time in bed.

    Our article on sleep efficiency explains how sleep time, wakefulness, and time in bed are related.

    Why Do Sleep Calorie Calculators Give Different Results?

    You may see substantially different results when entering the same weight and sleep duration into two online calculators.

    This is not always a calculation error. Different models may use different physiological reference values and assumptions.

    The Difference Between a MET Estimate and an REE Estimate

    One commonly used activity-energy method relies on metabolic equivalents, or METs.

    The 2024 Adult Compendium of Physical Activities assigns sleeping a value of 1.0 MET.

    A conventional MET is defined using approximately 3.5 milliliters of oxygen per kilogram of body weight per minute.

    A standard formula for estimating energy expenditure is:

    Calories = METs × 3.5 × Body weight (kg) / 200 × Minutes

    For a 70 kg person sleeping for eight hours, the standardized 1-MET calculation gives:

    1.0 × 3.5 × 70 / 200 × 480 = 588 kcal

    That differs from the approximately 451 kcal obtained earlier using the individualized resting-energy prediction and a 0.85 adjustment.

    Why?

    The MET formula uses a standardized oxygen-consumption reference based on body weight. The earlier calculation begins with a prediction involving height, weight, age, and a sex-related coefficient, then assumes a reduction in energy use during sleep.

    These methods are based on different assumptions. Their outputs are not two measurements of the same person's actual sleeping metabolism.

    In particular, assigning sleeping 1.0 MET within an activity classification system does not establish that every individual's sleeping energy expenditure equals their true resting metabolic rate.

    The conventional 1-MET reference can differ appreciably from measured resting metabolism, which contributes to discrepancies between estimates.

    The practical takeaway: Use one clearly defined estimation method consistently. Avoid treating the result as a precise personal measurement or comparing estimates generated from incompatible assumptions.

    Prediction Equations Cannot Capture Every Individual Difference

    Resting-energy equations are developed using data from specific study populations.

    They estimate the average relationship between variables such as body size and metabolic expenditure, but they cannot perfectly predict every person's energy requirements.

    Differences may reflect:

    • Fat-free mass and body composition
    • Age and growth or aging-related changes
    • Medical conditions or medications
    • Hormonal and metabolic variation
    • Recent food intake and physical activity
    • Differences between actual sleeping metabolism and the assumed adjustment factor

    For more precise research or clinical measurements, indirect calorimetry can estimate energy expenditure from respiratory oxygen and carbon dioxide exchange.

    Whole-room indirect calorimetry can also be used to investigate metabolic changes over an extended period, including during sleep.

    These approaches require specialized equipment and controlled conditions and are not equivalent to everyday consumer wearable calorie estimates.

    What Factors Affect Calories Burned While Sleeping?

    Several factors influence overnight energy expenditure, and they do not all affect metabolism in the same way.

    Body Size, Lean Mass, and Age

    Larger bodies generally require more total energy to maintain essential functions, although body composition matters substantially.

    Fat-free mass includes tissues such as skeletal muscle and metabolically active organs, which contribute to resting energy requirements.

    People with different amounts of lean tissue may therefore expend different amounts of energy at rest, even when their total body weight is similar.

    However, it would be misleading to imply that adding a small amount of muscle automatically produces a dramatic increase in the number of calories burned overnight.

    Age also influences predicted energy expenditure, partly through changes in body composition and other physiological factors.

    These effects are more complex than a fixed decline in metabolism after reaching a particular birthday.

    Sleep Stages: REM, Light Sleep, and Deep Sleep

    Energy expenditure can change between sleep stages, but these differences are generally modest compared with the difference between resting and substantial physical activity.

    During REM sleep, brain activity shows distinctive patterns, and some studies have found greater whole-body energy expenditure compared with slow-wave sleep.

    Deep sleep, also called N3 or slow-wave sleep, is commonly associated with lower metabolic demand than more active sleep states.

    However, the research is not completely uniform.

    A study involving 29 healthy adults measured sleeping energy expenditure with whole-room indirect calorimetry and clinical sleep staging. The researchers found differences between sleep stages and changes across the night.

    Other experimental work has reported less consistent stage differences after accounting for measurement conditions and the period of the night being analyzed.

    Therefore, it is not scientifically reliable to assign a fixed number of calories to every minute of REM, Light, or Deep Sleep based on a consumer sleep chart.

    Consumer applications may also combine N1 and N2 under a label such as Core Sleep or Light Sleep, while estimating Deep and REM using algorithms.

    These estimated stages cannot independently measure whole-body metabolic expenditure.

    Attempting to increase REM sleep simply to burn more calories is not a useful or evidence-based weight-management strategy.

    Body Temperature and the Sleep Environment

    Sleep is closely connected to temperature regulation.

    Core body temperature normally changes across the sleep-wake cycle, and environmental temperature can influence comfort, sleep continuity, and physiological demands.

    However, it would be incorrect to assume that making the bedroom extremely cold is an effective way to increase meaningful nighttime calorie expenditure.

    Uncomfortable temperatures can disturb sleep, and their effect on total energy expenditure depends on multiple factors.

    A comfortable, appropriately cool sleeping environment is preferable to deliberately exposing yourself to extreme temperatures for a theoretical metabolic benefit.

    Exercise, Food Intake, and Medical Conditions

    Physical activity can influence energy expenditure and recovery-related metabolism after a workout.

    The timing, intensity, and duration of exercise may influence how much metabolic activity remains elevated later in the day.

    Food intake also requires energy for digestion, absorption, and nutrient processing. This is often called the thermic effect of food.

    However, any additional energy expenditure associated with a meal or workout should not automatically be described as calories generated by sleep itself.

    Some medical conditions, including thyroid disorders, can affect metabolic rate. Medications and other physiological circumstances may also change energy requirements.

    Persistent unexplained changes in weight, energy, or physical function should be assessed in context rather than attributed to an assumed change in nighttime metabolism.

    Does Sleeping Longer Help You Burn More Calories or Lose Weight?

    If you spend an additional hour asleep, your body continues using energy during that hour. In that simple sense, a longer sleep period can account for more total sleeping calories.

    But this does not mean extending sleep indefinitely leads to greater weight loss.

    That extra hour would otherwise have been spent doing something else, and the energy expenditure associated with that alternative activity also matters.

    Moreover, the benefits of sufficient sleep extend far beyond the calories used while asleep.

    Why Staying Awake Longer Is Not a Good Calorie-Burning Strategy

    Because energy expenditure is often lower during sleep than during quiet wakefulness, skipping sleep may temporarily increase the energy used during that period.

    However, this short-term comparison is not an effective strategy for weight management.

    Insufficient sleep can influence appetite, food choices, glucose regulation, daily activity, and other components of energy balance.

    Any small increase in energy expenditure from additional wakefulness may be offset or exceeded by changes elsewhere.

    Regularly cutting sleep short also increases risks related to alertness, performance, and overall health.

    What Human Research Says About Sleep and Energy Intake

    One randomized clinical trial examined sleep extension in 80 adults aged 21–40 who had overweight and habitually slept less than 6.5 hours per night.

    Participants in the sleep-extension group increased their sleep duration by approximately 1.2 hours compared with the control group.

    Over the study period, the sleep-extension group consumed an estimated 270 fewer calories per day, on average, relative to the control group. Total daily energy expenditure did not show a significant treatment-related difference.

    This finding suggests that adequate sleep may influence energy balance through changes in food intake and behavior rather than through a major increase in calorie expenditure.

    However, the intervention was conducted in a specific population over a limited period. It does not mean that every additional hour of sleep causes a 270-calorie reduction in daily food intake.

    What Is the Better Goal for Sleep and Weight Management?

    For most adults, the more useful goal is obtaining sufficient sleep consistently rather than maximizing the estimated number of nighttime calories.

    General sleep-health recommendations encourage adults to obtain at least seven hours of sleep per night, with individual needs varying.

    Practical habits include:

    • Maintaining reasonably consistent bedtime and wake-up times
    • Allowing enough time for actual sleep, including normal sleep onset and occasional awakenings
    • Being physically active on a regular basis
    • Following a balanced, sustainable eating pattern
    • Avoiding caffeine late in the day when it interferes with sleep
    • Reducing alcohol exposure that can disrupt sleep continuity
    • Keeping the bedroom quiet, dark, and comfortable

    These habits support general sleep and metabolic health. They do not guarantee a specific nightly calorie total or a particular rate of weight loss.

    Can a Smart Ring Measure Calories Burned While Sleeping?

    Consumer wearable devices can estimate energy expenditure, but estimating calories is different from directly measuring the oxygen and carbon dioxide exchange used in laboratory metabolic testing.

    Wearable algorithms may incorporate available information such as body characteristics, activity, movement, heart rate, and device-specific calculations.

    The exact approach varies between products and may change with software updates.

    Why Wearable Calorie Estimates Can Differ From Calculators

    A general sleeping-calorie calculator begins with a prediction about your metabolism.

    A wearable may combine several inputs to estimate total energy expenditure or activity-related expenditure over a particular period.

    Differences can arise because:

    • The device and calculator use different metabolic equations.
    • One value represents total energy expenditure while another includes only activity-related energy.
    • The device estimates actual sleep time differently from the time entered into a calculator.
    • Different personal characteristics or resting baselines are used.
    • Sensor quality, wear consistency, and algorithm processing affect the estimate.

    A wearable showing a different number does not automatically mean one of the calculations is wrong.

    However, the difference should remind you that these are estimates, not direct measurements of calories metabolized by the body.

    It is also important to avoid double counting. If a daily energy-expenditure estimate already includes resting metabolism, adding a separate sleeping-calorie estimate to that total would count some of the same expenditure twice.

    How RingConn Supports Sleep and Activity Awareness

    A sleep tracker can help you understand how much time you spend asleep and how your sleep timing changes across nights.

    For example, a health tracking ring such as RingConn Gen 3 supports monitoring of sleep duration, estimated sleep stages, heart rate, HRV, activity, steps, and estimated calorie expenditure.

    These measurements may provide useful context for understanding your sleep and activity habits together.

    However, RingConn does not directly measure your sleeping metabolic rate through respiratory gas analysis.

    Its calorie estimates should not be treated as laboratory measurements of nighttime energy expenditure, and its estimated sleep stages cannot establish how many calories you burned in each stage.

    For more information on how to interpret the broader set of app metrics, see the guide to RingConn health scores.

    What Should You Look at Instead of One Calorie Number?

    If you want to understand the relationship between your sleep and daily habits, reviewing consistent trends is often more useful than comparing isolated calorie estimates.

    Consider tracking the following for seven nights:

    1. Total sleep duration: How many hours were actually estimated as sleep?
    2. Sleep timing: Are your bedtime and wake-up times reasonably consistent?
    3. Sleep continuity: Are there frequent or unusually long wake periods?
    4. Daytime activity: Have your walking, exercise, or overall activity patterns changed?
    5. Morning experience: Do you generally feel rested and able to function well?

    You may notice, for example, that shorter nights often follow late work, or that changes in exercise timing coincide with changes in your sleep schedule.

    These patterns can help identify habits worth adjusting.

    They do not establish how many calories were burned during individual sleep stages or prove that a particular behavior caused a measured change in energy expenditure.

    Final takeaway: Your body burns calories throughout sleep because essential physiological systems remain active. Rough estimates often begin around 50 calories per hour, but a more personalized calculation requires assumptions about resting metabolism and actual sleep time. Use these numbers to understand energy expenditure, not as a nightly target to maximize. Consistent sleep, regular physical activity, and appropriate nutrition are more useful for long-term health than trying to increase overnight calorie burn.

    Frequently Asked Questions

    1. How many calories do you burn in 8 hours of sleep?

    Using a simple estimate of 50 calories per hour, eight hours of sleep would account for approximately 400 calories. However, the actual amount depends on body size, resting metabolic rate, age, and other factors. A calculation based on an individual's predicted resting energy expenditure may produce a higher or lower result. Neither method directly measures the person's nighttime calorie expenditure.

    2. How many calories do you burn sleeping for 6 or 7 hours?

    At an illustrative rate of 50 calories per hour, six hours would account for approximately 300 calories and seven hours for approximately 350 calories. These are general examples, not universal averages. For a more personalized estimate, calculate your predicted resting energy expenditure, apply a clearly stated sleep adjustment, and multiply by actual hours asleep.

    3. Does sleeping burn more calories than sitting or lying awake?

    Usually not. Sleep generally involves lower whole-body energy expenditure than quiet wakefulness, although the difference varies with sleep stage, physiological conditions, and the measurement method. Sitting, lying awake, and sleeping all require energy to maintain essential bodily functions. None of these states produces a large calorie-burning effect comparable to sustained physical activity.

    4. Do you burn more calories during REM sleep or deep sleep?

    Some laboratory studies have found higher energy expenditure during REM sleep than during deep slow-wave sleep. However, findings differ across studies, and the differences depend partly on the timing and methods used. There is no reliable consumer formula assigning a specific calorie value to each minute of REM or deep sleep. A wearable sleep-stage chart cannot directly determine stage-specific energy expenditure.

    5. Does dreaming burn extra calories?

    Dreaming is associated with sleep-related brain activity, particularly during REM sleep, but dreams can also occur during other stages. There is no established way to calculate extra calories from the intensity or content of a dream. Although metabolic activity changes during sleep, having vivid dreams does not mean you burned a meaningful number of additional calories.

    6. Can sleeping longer help you lose weight?

    Sleeping longer increases the amount of time your body spends expending energy during sleep, but it does not automatically create a larger daily calorie deficit. Research suggests that sufficient sleep may influence appetite, food intake, and energy balance. For people who routinely sleep too little, improving sleep duration may support weight-management efforts, but it should not replace appropriate nutrition and physical activity.

    7. Are smart ring calorie estimates accurate during sleep?

    Smart rings can estimate energy expenditure using available sensor information and algorithms, but they do not directly measure the respiratory gas exchange used in laboratory calorimetry. The accuracy of a specific estimate depends on the device, algorithm, individual, and measurement conditions. RingConn provides estimated calories and supported sleep metrics for wellness tracking; these should not be interpreted as exact measurements of calories burned while sleeping.

    Medical and wellness note: The calculations in this article are educational estimates intended for generally healthy adults and may not apply to children, pregnancy, certain medical conditions, or people with unusual metabolic requirements. RingConn products are consumer wellness devices, not medical devices, and are not intended to diagnose, treat, cure, or prevent disease. Their calorie and sleep estimates do not replace clinical metabolic testing. Seek individualized medical advice for persistent unexplained weight changes, unusual fatigue, or other concerning symptoms.

    Lecture suivante